Skip to content

Machinery-CNC

Hello world!

Posted bycncglass October 30, 2014

Welcome to WordPress. This is your first post. Edit or delete it, then start blogging!

Posted bycncglassOctober 30, 2014Posted inUncategorized

Post navigation

Next Post Next post:
Thermal Laminated Glass Edges Trimmers, for EVA, PVB, SGP, TPU

Recent Posts

  • (no title)
  • (no title)
  • PTFE high-temperature net belt Fiberglass fabric coated with PTFE is made up of high-capability fiberglass which has steeped into PTFE. Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 It is a new product with Main capability and characteristics: 1). It can be used under the temperature of -196°C to 300°C, 2) which has the capability of weather resistant and age 3)resistant. Under practical situation of high temperature of 4)250°C for 200 days, not only the intensity will not decrease, 5)the weight will not reduce; if put it under the high temperature 6) of 350 °C for 120 hours, the weight only decreased by about 7) 0.6%; under the situation of -180 °C, it will not chap and keep 8) the original pliability;
  • Edges Cleaning hot knife for SGP PVB laminated safety glass Hand operated tool for cutting small quantities, for short-time operation only. To cut and seal synthetic fiber products, such as ropes, bands, belts and fabric. Fitted with cutting foot, the combined tool is especially effective for cutting synthetic fabric without cutting surface. Controlling heating by switching the toll on and off Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 Hot Knife Electric Rope Cutter Cautions Always operate the Hot Knife in well ventilated space. Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped. Only operate Hot Knife when it is in contact with the insulation board Keep hot blades away from skin, clothing and other flammable materials. Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.
  • (no title)

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Machinery-CNC, Proudly powered by WordPress.